Balkans, Greece, Italy – spring trips 2024 can now be booked!

Touring paddle

There are basically two basic variants of touring paddles: for the flat paddling technique and for the steep paddling technique.

The latter is more efficient, but requires a certain learning effort. The usual lengths start at about 205cm. From this length, we also strongly recommend divisibility. This not only saves shipping costs, but also transport damage in your own vehicle.

In principle there are different types of divisibility:

  • in fixed detent, so the angle is always the same
  • in variable locking, the angle is freely selectable, the length is the same
  • in variable clamping, with a freely selectable angle and up to 10 cm additional length.
  • In addition, some paddles are even offered in 3 or 4 parts in order to be able to store them in a boat as a spare paddle, for example.

If you want to go on long, sporty tours, a carbon paddle is a good choice. (As long as you can avoid too much stone contact!)

FAQ, glossary & keyword filter for >Touring Paddle

  • aluminum shaft
    (2 x)

    The cheapest paddles come with heavy but scratch-resistant aluminum shafts. The stiffness does not come close to good fiberglass or carbon shafts. Fatigue sets in much earlier over longer distances.

  • Bundle
    (1 x)

    This product is also available in a set / package / bundle!

  • Carbon shaft
    (20 x)

    A carbon shaft stands above all for lightness and rigidity.
    Different amounts of carbon in the fiber structure of the different shafts ensure optimal power transmission for every paddle stroke. In addition, the low weight prevents rapid fatigue on long tours.

    If you often have to look when paddling whitewater and then always throw your paddle into stony corners, you should buy a scratch-resistant fiberglass paddle.

    Carbon paddles should be better packed during transport.

  • one-piece paddle
    (8 x)

    A one-piece paddle is obviously not divisible. Many paddle manufacturers also offer 2-, 3- or 4-piece versions of their established models. These cost a little more, but can also be stowed across the trunk or even in the boat itself as a spare paddle. And when ordering online, divisible paddles are cheaper to ship!

  • Ego / Benevolence
    (6 x)

    For some paddlers, the wrists are not perpendicular to the forearm.

    For some, the angle is up to 45°. An ergo shaft allows the wrist and elbow joints to be relieved by curving the shaft of the paddle.

    There are ergo shafts (or bent shafts) with different angles. Because the curved grip area is always in a fixed position, length-adjustable ergo stocks only make sense to a limited extent. So please pay attention to the right length.

    For the same reason, there are also different bicycle handlebars or curl bars.

  • fiberglass shaft
    (9 x)

    A fiberglass shaft (GRP) is less rigid than a carbon shaft (CRP) despite being heavier. This means a slightly more sluggish conversion of the power per paddle stroke with a little more energy loss due to the cushioning. In return, the force peaks on the wrists are lower.

    In addition, glass is heavier, but also less sensitive to scratches and also cheaper. For the vast majority of paddlers, GRP is the best value for money.

  • Children's paddle
    (3 x)

    Paddles for the little ones.

  • small shaft
    (4 x)

    A small shaft is good for paddlers with small hands to make it easier to grip.

  • laminate sheet
    (4 x)
  • packraft
    (2 x)

    Packrafting sometimes also bike rafting is often promoted as a new sport. It is a variety of paddling that takes you back to the roots!

    From the very beginning, paddling was not only a sport but also a journey. Discover places that have no road access. There are almost no such places in Europe today.

    However, in Lapland, Alaska, Patagonia, Central Asia and similar sparsely populated regions there are still waters that can only be reached by carrying your material.

    And that's where the packraft comes into play: boats suitable for lakes and white water from 4 kg! A dream comes true! Trekking + paddling in a multiday adventure!”

    Get advice!

  • Foam core
    (15 x)

    The foam core in the paddle blade

    keeps the front and back laminate layers apart, making the blade thicker without adding much weight. This makes the blade stiffer, so the force is put less into deforming plastic and more directly onto the water.

    The difference is like between 2 sheets of paper and corrugated cardboard (which itself is just 2 sheets of paper + the corrugated middle paper): the corrugations keep the two layers apart, making the construction much stiffer.

  • Sea kayak paddle
    (23 x)
  • divisible paddle
    (19 x)

    A divisible paddle can be broken down into 2, 3 or even 4 parts. This makes transport easier, for example. Eg across in the trunk or to take with you on the plane. When ordering online with parcel service delivery, divisible paddles are cheaper, because from 2m forward shipping may come into play.

    With many two-piece paddles, it is also possible to vary the length and twist of the paddle.

    3- or even 4-piece paddles are particularly suitable as replacement paddles for abandoned paddling expeditions, which can be easily stowed in the rear of the kayak.

  • Touring paddle
    (29 x)

    There are basically two basic variants of touring paddles (= hiking paddles): For the flat paddling technique and the steep paddling technique.

    The latter is more efficient, but requires a certain learning effort. The usual lengths start at about 205cm. From this length, we also strongly recommend divisibility. This not only saves shipping costs, but also transport damage in your own vehicle.

    In principle, there are three types of divisibility:

    • in firm detent , so the angle is always the same
    • in variable detent, the angle is freely selectable, the length is the same
    • in variable clamping, with a freely selectable angle and up to 10cm additional length.

    In addition, some paddles are even used in 3 or 4 parts offered to use them as eg in a boat Replacement paddle to be able to stow away.

    If you want to do long tours in a sporty way, a carbon paddle is a good idea.

  • adjustable paddle
    (13 x)

    All adjustable paddles. More differentiation via extended keyword search (touring, white water,...)

  • Upstream sheet
    (4 x)

    A blade placed in front stabilizes on the forward stroke, but creates flutter more easily on a counterstroke. In addition, you get a few inches further forward, to immerse yourself. And you can pull out the blade to steer with tighter elbows.

    A strongly upstream blade rewards paddlers who already have a sophisticated paddling technique. Especially if you cover a lot of distance, or if you drive tight curves with your arms narrow, you still tend to go forward, i.e. in slalom.

    As a toy boat driver probably not.

  • Adjustable angle & length
    (14 x)

    Mechanisms to adjust the angle and length of paddles:

    • – Snaps in the aluminum shaft with different holes
    • – Bayonet locks
    • - Screw connections ala broomstick (almost only with SUP paddles)
    • – Werner Vario division with 15° increments of snap-in and push button
    • – Clamping lever made of aluminum or plastic

    The latter solution has prevailed, it is used by numerous manufacturers, because it allows a relatively effortless operation even on the water (in contrast to the push button of the aluminum paddle and the broomstick connections). In addition, the clamp lever connections are also adjustable in length, 10-15cm, in contrast to the vario clamp and the button connection.

    How useful is the adjustability?

    • When paddling long distances, it can make sense to vary the length from time to time in order to put a different strain on the muscles. Or when different paddlers share a spare paddle. Or when they are used with boats of different widths. Length adjustability makes only limited sense, for example with ergo shafts, because the grip position also moves apart.
    • Ovalized shafts are glued to the blades. So you not only turn the position of the blade, but also the ovalization. Therefore, a variation of the rotation is usually only pleasantly usable by a maximum of +/- 20° to the "design angle".